Tuesday, March 31, 2015

What Are The Benefits of the Alvin Craftmaster III

Choosing a drafting table can be a confusing process. Some tables have features that seem strange while others have no extra features at all. A good drafting table can improve the quality of the work being done and make everything easier. The CraftMaster III is one of the best-designed tables available. The Alvin CraftMaster III has several benefits.

Split Top Design

One of the main benefits of the CraftMaster III is the split top design. The work surface is divided into two parts. This is unlike most other drafting tables. The larger left side of the table can be angled up as normal. It provides a stable surface for drawing or doing crafts. The smaller right-hand side remains flat and level regardless of the angle of the main surface. This provides a solid surface where different supplies can be stored or temporarily docked while working. The split top design makes drafting, drawing or doing crafts much easier.

Built-In Storage

A second benefit of the Alvin CraftMaster III is that the table has built-in storage in two areas. The first is a storage shelf under the main work surface. This shelf can be used to hold infrequently used drafting supplies or even extra paper. There are also four drawers mounted underneath of the non-adjustable portion of the work surface. These drawers make it simple to store small items like technical pens, French curves or kneaded erasers. The drawers also keep all supplies within easy reach while drafting without taking up any additional floor space.

Casters on the Frame

A third benefit of the CraftMaster III is that the frame can be outfitted with a set of casters. These are wheels that fit on the bottom. Casters are important because they allow anyone to maneuver the table into the correct position with little effort and without damaging the floor underneath. The casters make the table mobile so that it can be moved to take advantage of better light or other tools in the studio. The casters can even be removed and replaced with floor glides if the wheels are not right for the surface underneath.

Sunday, March 29, 2015

Why You Should Use Hanging Blueprint Holders

Dealing with blueprints every day can become tedious with the wrong type of holder. Flat files and tubes both have major drawbacks that can make them impractical to use in any successful studio or office. One of the best alternatives is a handing holder. There are a few reasons why every office or design studio should be using hanging blueprint holders.

Keep the Blueprints Mobile

One of the main reasons to use hanging holders is to keep the blueprints in the office or studio mobile. The majority of these racks come with wheels on the bottom. This allows anyone to move all the blueprints on the holder around with very little effort. This is incredibly useful because it means the blueprints can be moved between drafting tables or meeting rooms whenever they are needed. It also allows the blueprints to be stored in a closet or placed in a secure location where they can remain safe.

Protect the Blueprints from Damage

An issue that comes with handling blueprints is that they can be damaged fairly easily when not properly protected. Storing blueprints on a desk makes them vulnerable to spilled drinks or folding. Putting them in drawers could result in tears as people sort through the blueprints. A hanging holder is designed to keep the blueprints in perfect condition. The blueprints will be hanging straight down so that they remain flat. The holder also keeps the blueprints far from work areas so that drafting supplies, employees or clients will not damage them.

Save Space in the Office or Studio

Space is often very valuable in a design studio or office. The last thing people want is to have huge metal flat files taking up enormous amounts of space that could be used for workstations, drafting supplies or meeting clients. One of the primary reasons to use hanging blueprint holders is that they save space. A single rack can often hold up to 1,200 different blueprints all within a very small and compact area. A few racks could easily be placed in a single closet so it becomes simple to store and organize thousands of blueprints.

Thursday, March 26, 2015

How to Use Drawing Storage Cabinets

Every person would wish to have their important documents kept in a safe and orderly manner. Businesses and big organizations are expected to store their documents in an orderly manner. Storage cabinets enable the organizations to have a reliable mechanism to ensure that the sensitive documents are safe. The organization’s staffs can retrieve the documents for reference purposes quite quickly. There are various systems used to store documents. One of the reliable mechanisms is the use of drawing storage cabinets. The use of cabinet systems allows the user to label the chambers or the drawers for storage of related documents. The cabinet method is advantageous because there is no need to have box files. Some cabinets have chambers with storage boxes, racks, clamps or corrugated rolls upon which staffs can recognize valuable data.

People store various documents in the cabinets. For instance, blueprints, maps, large rolled documents or other crucial organizations’ transactions prints form the principal kinds of documents stored in bulks. The documents need to have different labels when being filed. The filing of valuable information usually uses names, titles, types, sizes, dates of production or chronological order of production. The dates of documents are significant determinants in devising the methods to use in drawing storage cabinets. The formatting style, the labeling of drawers or files can help to identify particular information quickly. Other cabinets have color codes as a means of enhancing labeling, and for easy identification of the contents of each drawer.

The storage racks are either vertically or horizontally accessed. However, the choice of cabinets is dependent on the type of documents to be filed. The desired make and color of cabinets, whether wooden or made of steel, is an important aspect of storage. The most crucial consideration in a storage facility is its appropriateness in ensuring that an organization’s or personal filing needs are met. A well-developed cabinet storage mechanism offers practical and safe storage facility for many organizations.

Monday, March 23, 2015

Drafting Desk Chairs - Comfort and Convenience

Drafting chairs are the most important feature in any project design office. Draftspersons plot large designs using a drafting table or CAD (computer aided design). For these employees, drafting desk chairs should be comfortable and convenient. Seating in project design offices affects the productivity of draftspersons and mechanical designers. In some offices, there may be teams of designers who draft drawings and schematics that take weeks to complete. Clearly, drafting chairs should be fully mobile and ergonomically suited to the specific daily projects drafting entails.

Drafting Chair?
Drafting chairs are highly convenient in project rooms where there are multiple designers plotting the same project drawing. Most of these have polyurethane seats. Certain models have a tilt feature and an ergonomically designed seat for additional comfort. Drafting chairs allows draftspersons to sit or stand as needed during their daily design work. Most have high backs and can be adjusted easily for height. The seats and backs may be manufactured with leather or fabric. Most drafting chairs are padded with urethane foam for extra comfort. The size of the project design room usually determines which type of chair is more compatible with worker productivity, mobility and access to drawing boards and computers.

All drafting chairs in our collection are sturdy, durable and adjustable. They fit neatly under a desk or a drafting table and provide maximum comfort for project designers and draftspersons. If the drafting chairs in your project room have become shabby or worn, it’s time to replace them with ergonomically designed chairs. Drafting Seals is a top name among drafting suppliers.

Friday, March 20, 2015

Using a Measure Master Pro Calculator

Carpenters are called on to process many figures over the course of a work day. Measurements of length, height and width must be calculated to discover the proper amount of materials to be ordered. The proper size or length needs to be subtracted from existing supplies to determine how useful the remainder will be. A thousand different numbers are constantly running through their mind and clamoring for attention.

A devise like the Measure Master Pro Calculator can make these everyday tasks much simpler for the builder. Unlike an ordinary calculator, it is able to separate figures into the standard building formats of feet, inches and fractions of an inch that they are used to working in. The display can be changed from fractions to a decimal setting for engineering purposes. Units of measurement can be changed from American standard to metric and back if conversion is necessary.

The calculator is designed with the needs of the building trades in mind. It posses dedicated function keys for height, length and width to speed area and volume calculations. Circumference and arc keys add to the simplified tasks helped by the calculator. These keys can be used to discover perimeter measurements and help with the squaring up process as well as figuring weight and weight per volume as the situation demands.

A construction site is often a hazardous place for fragile electronic gadgets. The Measure Master Pro Calculator comes complete with a hard plastic slide cover to protect it from damaging drops, accidental hits or just the sawdust it is surrounded by. An easy to use pocket reference guide is supplied in both English and Spanish. When the guide is combined with the calculator, a builder will have most of the tools he will need to figure building supplies at his fingertips. It is supplied with a long life battery and has a one year limited warrantee to ensure that it is always working when the carpenter needs it too.

Friday, March 13, 2015

Why a Rolling Drafting Table Should Be In Every Studio

A wide variety of drafting tables are available today. Some are classic and have the features anyone would expect. Others use new innovations like tempered glass tops. One of the simple features that can really help is a set of casters under the table. Every studio should contain a rolling drafting table for a few reasons.

Easy Mobility

One of the main reasons a drafting table with rolling wheels is useful is because of easy mobility. Some large and heavy wooden drafting tables are difficult to move. They are intended to sit in one spot only. This can be inconvenient in a studio. A rolling table allows anyone to quickly position the table in a new location without damaging anything or having to call in friends. The drafting table can be moved around to make presentations, open up space or to take advantage of better light throughout the day.

Adjust the Position as Needed While Working

There are many different situations while drafting where it becomes necessary to change positions in order to achieve better control over the tools being used. This can happen when doing delicate work with an ink pen or when using tools like a pantograph or parallel rule. Moving the chair does not always work. A rolling drafting table can be repositioned as needed while working in order to find the most comfortable position possible. This can be done in the moment without damaging the floor or the table.

Added Stability

Several different portable drafting boards are available. These boards are intended to be propped up on tables or placed on the lap. The major disadvantage of these portable boards is that they are not stable. Drafting requires precision in order to attain the most accurate renderings possible. A board could move unexpectedly while drafting leading to a mistake that ruins the entire piece. A drafting table that rolls is a portable option that has much better stability. The drafting table has legs supporting the surface so that nothing moves. The wheels can be locked to keep the table in one stable position. The added stability makes rolling tables the right choice for studios where portability is required.

Tuesday, March 10, 2015

Tips for Engineering Careers

Engineers use a number of tools to get their job done. One of the most important tools they use is the engineering scale. These scales help engineers measure in precise measurements for accuracy. Engineering graduates are in demand across the country. Students who plan to graduate with a degree in engineering must be prepared for obtaining a bachelor's degree at a university or four-year college.

Students who hope to land an engineering job should develop a portfolio of projects to show prospective employers they have what it takes to do the job. Connecting with employers via the social media network is a great way to land a good engineering job. Whether you pursue a mechanical, software, electrical or structural engineering job, you'll need to prove to your prospective employer you are qualified for the job.

Look for engineering jobs with a placement service linked to your college. Engineering school requires a high level of self-discipline and perseverance to succeed. A career in engineering gives you a steady, high-paying and rewarding job. There are 15 branches of engineering that provide jobs for engineer graduates. Consider hiring a professional resume service for best results. The resume is an important tool that makes the first impression on hiring managers.

Huntsville, Alabama is the place that has the most engineers in a concentrated city. That's because its home to a well-known NASA flight center and other military organizations. Build your engineering skills by learning how to manage people, finding a mentor and continuing your education. Successful engineering skills is a constant learning process.

Stay current with engineering trends found in your industry. New innovations in oil and gas engineering can impact other branches of engineering. Accelerate your engineering career by taking the time to plan out your career steps. Write down a one, five and ten year plan for engineering success. You may have to change jobs along the way to keep yourself in line with your long-term goals. Once you land your coveted engineering job, don't compete with coworkers but become a team player. The goal is to show your supervisor that you're willing to go above and beyond your job description.

Saturday, March 7, 2015

Important Drafting Tools That Are Probably Missing From Your Studio

There are hundreds of different tools for drafting available today. Some people do not even know about some of the most classic tools that have been used for decades. The reality is that the right selection of tools can make many drafting tasks simpler and can provide better results. Several drafting tools are available that might be missing from many studios.

Complete Compass Set

Most people who do drafting regularly have a compass. Something that might not be in the studio is a complete compass set. The set is a collection of different tools and attachments that are incredibly versatile. They generally include a solid compass, an extension bar for larger arcs and multiple attachments. The attachments can be used to draw an ink line, cut clean circles or hold a technical pen in the compass. This is one of the most useful and essential tools for drafting.

Pantograph

A pantograph is a simple tool that can take the stress out of scaling drawings up or down. The device expands and contains a network of holes. The positioning of the joints and holes can be adjusted in order to select the exact ratio to use when scaling an image. It is an analog device. A stylus is placed in the bottom hole and a pen or other drawing tool at top end. As the existing image is being traced, the pantograph draws it at a different scale on another surface simultaneously.

Expandable Divider

An expandable divider is one of the most effective drafting tools available today. This is a metal device with a number of teeth on the bottom. The divider expands out like an accordion. The unique aspect of the divider is that all of the teeth maintain a perfectly equal distance from each other. Marks on the divider allow the user to select the exact measurement of the division between the teeth. This tool can be used to quickly mark out equal divisions or make precise measurements.

Ruling Pen

A final tool that should be in every studio is a ruling pen. This is similar to a crow quill although it is far more precise. The pen is dipped into ink and then used with a straightedge, French curve or other tool. The nib can be adjusted to get a single consistent line weight for the entire stoke. Ruling pens can make many drafting tasks much easier.

Friday, March 6, 2015

The Basic Drafting Supplies You Need To Get Started

Drafting is as much about the tools that are used as the talent of the individual. The right tools can ensure professional results every time. They make drafting much simpler. Anyone just starting should own a few basic drafting supplies.

Straightedges and Triangles

Drafting requires precision and clean lines or angles. This is why some of the most basic supplies needed are straightedges and triangles. A large straightedge with a non-slip back is needed. A similarly sized T-square is also needed to create lines perpendicular to the edges of the paper. At least two triangles with different sets of angles are required to get the best results possible when drafting. These supplies will take care of most larger angles and lines regardless of what drawing tool is being used.

Templates and French Curves

A full set of French curves is required to start drafting. French curves provide a way to create a wide range of consistent curves and arcs. They can be aligned freehand on any paper to match up with existing lines or shapes. A second necessary supply is a set of templates. Most drafting professionals have a large range of templates for every situation. The best templates to have when first starting should contain a range of circles, ovals, triangles and squares. It can also help to get specialized templates with commonly used electrical, flowchart or drafting shapes.

A Drafting Board or Table

Drafting cannot be done on a flat table or irregular surface. This is why a drafting board or table is needed. A drafting board is good for those just starting. A drafting board has a perfectly flat surface with edges aligned at right angles. This makes it possible to tack down paper and use T-squares or other items with the board. The drafting board needs to be angled up at the top when used to prevent distortions of perspective that could affect the final drawing.

Technical Pens and Lead Holders

The final two drafting supplies needed to start are technical pens and lead holders. Technical pens provide a consistent line weight when used regardless of how much pressure is applied. They also work with some other drafting tools like compasses. Lead holders are the standard for drafting because they last for a long time, are precise and can be erased if mistakes are made before inking the drawing. Be certain to get a lead pointer to sharpen the leads.